Tiltex is a needle punched, fibre reinforced, geocomposite, comprising of a high strength, rapid setting, cement-sand mix fixed between two layers of geotextile.

• Our exclusive Tiltex B cement-sand mix has an added Anti Cracking fibre enhancement. This distributed, self-reinforced, cementitious geocomposite material has dispersed basalt fibres and is an integral part of the cementitious geocomposite. These exclusive properties add durability, strength and flexibility with the ability to withstand extreme climate fluctuations.

• Tiltex B Anti Cracking GCCM replaces rip rap, stone chipping, grout blankets, shotcrete, concrete, bitumen geomembrane and other traditional erosion control products.

• Tiltex B is a cost effective alternative erosion control solution with a faster construction time and greater safety controls for the Tiltex B installation SWMS (Safe Work Method Statement)

  HIGH COMPRESSIVE STRENGTH 80MPa

HIGH FLEXURAL STRENGTH 16.1MPa*

ACHIEVES 50MPa COMPRESSIVE STRENGTH WITHIN 24 HOURS OF HYDRATION

TILTEX PRODUCT DIMENSIONS

Thickness: 7.5mm to 12.5mm

Weight: 7.5 kg to 12.5 kg per m2

Permeability Rating: 1 x 10-9 m/sec

Roll Width & Length: Tiltex standard roll is 5m wide x 20m long.

Custom widths and lengths are available.

TILTEX B -

ANTI CRACKING ENHANCEMENT

7B, 9B, 10B & 12B

• Tiltex’s highest quality product in the range.

• Exclusive to Tiltex Australia

• Includes an additional anti cracking enhancement for higher flexural strength and survivability in hyper-cold conditions.

TILTEX PLUS RANGE

• Same as Tiltex solid screen cementitious grades.

• Incorporates an engineered geomembrane in addition to the cementitious layer for lower permeability.

TILTEX SOLID SCREEN

7, 9, 10 & 12

• Tiltex solid screen product in 7.5 kg to 12.5 kg p/m2 is our standard erosion control system.

• Lower physical properties & no anti cracking enhancements.

• Best used for short term temporary applications only.

TILTEX TURF

7, 9, 10 & 12

• Comprising of Tiltex solid screen with an artificial turf layer fully bonded to the GCCM.

TILTEX SANDMAT

Tiltex Australia is pleased to add SANDMAT to the Tiltex range..

A geocomposite material impregnated with a layer of quartz sand, needle punched between two layers of nonwoven geotextile fabric to form a high strength, robust protection and drainage fabric.

SANDMAT prevents erosion and displacement of subsoils for embankments, stabilization works for erosion control, levies, watercourses, estuary and coastal environments. 

The material locks in a uniform sand layer for drainage conveyance, filtration, erosion and protection.

SANDMAT is manufactured in 5.1m wide rolls by 40m long rolls for erosion & scour protection of waterways and embankments where displacement of soils requires drainage, filtration and stability. SANDMAT can also be installed vertically.

SANDMAT is regularly used under Tiltex as a cushion layer and/or subsoil drainage layer.

TILTEX vs OTHER GCCMs

Tiltex B Other GCCMs

Compressive Strength: 80MPa 40MPa

Flexural Strength: 16.1MPa* 4-6 MPa

Tensile Strength: >20kn/m 6.6kn/m - 8.6kn/m

both directions one direction

Width: 5 metres 1.1 metres

Increase in gross material usage due to overlaps:

200 panels 909 panels

Based upon a 1000m x 10m wide channel:

300m2 1,363.5m2

Price: Competitive can be >30-40% higher**

Total Turn Key Solution Service:

Yes Often just supply

*tested after 7 days. See data sheet for detail

** based on market data received

The data above is average values derived from standard tests and market information are subject to usual product variation. The right is reserved to make changes without notice at any time.